Posted on

Home automation definition and introduction

Home automation definition and introduction

Home automation definition and introduction

What is home automation exactly?

(I apologize for mobile readers for article design flaws)  

Referred to as domotic or smart home which falls under the IoT (internet of thing segment)
We will be covering the IoT in another article, for now, I will focus on Home automation only.

So simply home automation is the ability to control, monitor and automate your Home technology and electricity (meaning by that appliance and power current).
For example, a fairly automated house using the latest popular devices in the market can be the following.

Starting with Security system where sensors are used to monitor and cover many (an unknown word that describes fears =) such as

  • Door, windows and drawer sensor
  • Motion and body heat detector
  • CO  detectors
  • Fire detectors
  • Gas detector
  • Water flood detector
  • Environment sensor (detect current temperature, humidity, light Lux, and maybe sound level”

smart motion sensor

 

 

motion detector

smart home automation door and widows sensor

 

 

door & windows sensor

Smart smoke sensor zigbee

 

 

smoke sensor

water smart sensor zigbee

 

 

water flood sensor

 

 

 

 

 

 

 

Of course, there might be more sensors that can cover other sections of interest but mostly these are the most common ones.

 

WiFi smart IP Camera 360° PTZ

 

 

WiFi smart IP Camera

Parallel and as an add on the security sensor kit, smart cameras can also be used to monitor the house and the surrounding, also it can be used as front door ring and communicator using a camera with push notification and 2-way voice.

smart WiFi door lock

Doors control to get access to enter the house or any specific room if needed can be covered by what is so-called the smart door lock device, where you have the ability to control who can have access and to your house and when.

 

Lighting control has many types of devices that can be used like smart switch panel, smart bulb, smart light strip, smart micro relay, a smart plug, and a smart bulb socket. These smart devices’ features vary between one and another wherein some you have the ability to switch ON/OFF and others have the ability to dim and change the color light (RGB). and of course, the installation varies, depending on the needs of the situation.

Broadlink TC2 smart light switch

 

 

light switch

Smart light bulb WiFi RGB dimmable

 

 

Smart light bulb

smart wifi micro relay

 

 

smart wifi micro relay home automation iot

 

Broadlink smart plug sp3s

Broadlink Mp1 WiFi Power strip

 

 

 

 

An appliance such as coffee machines, microwave, washer, well mainly any traditional appliance with a plug can be controlled using a smart plug or smart power strip, also the features depend on the appliance specification such the power consumption and voltage.

An appliance such as coffee machines, microwave, washer, well mainly any traditional appliance with a plug can be controlled using a smart plug or smart power strip, also the features depend on the appliance specification such the power consumption and voltage.

Broadlink infrared rm mini3 controler

Devices that can be controlled by an IR remote control such air condition, television, sound system and so on, these devices can be controlled through an IR hub that can take control of all appliances in a range less than 8 meters and with direct ”*vision”.

House drapes, curtains and shutters can be controlled by using a smart meter or if they already have an electric motor a smart switch controller can be used.

Broadlink Sc1 IOT

Power relay switch devices can be used to control, things such as water heater, heating units, and similar appliances.

 

Mainly a well automated home will be controlled from one platform which includes many features and tools that can help more in automating and organizing house appliances.
For instance, features such creating scenes that can do several actions at once, for example, a out of home scene will send an order to switch OFF the TV, all Air conditions, lights, close the drapes, lock the main door and lock the security system or the opposite. These scenes can be customized as needed of course.

Another feature that is available in most systems, is the IFFF interaction, where a sensor-specific state can send action order to any smart devices, for example, the door sensor can trigger the alarm siren and send notification alert, also the motion sensor can send an order to switch a specific light on when a motion has been detected, or when the temperature sensor state get to a certain level it will automatically turn on the AC unit or the opposite (to maintain the house a certain temperature). Also, these triggers or scenarios can be customized as needed.

As for the monitoring, many features are available, like history state of smart devices, energy monitor (power meter) where you can monitor power spending in history in voltage and watts where also you can read the history and get to know the cost of the consumed power of a specific device, room or even the whole house.

amazon alexa echo dot 3 generation

 

 

amazon alexa echo dot 3 generation

google home mini

 

 

smart speaker

 

 

 

 

 

 

Integration, most of home automation devices developers are tending to create some integration with other developers, especially with well-known brands devices. For example, the smart speakers created by Amazon and by Google, most of the H.A manufacturer and developer if not 90% of them makes sure that their devices work with these smart speakers, also some brands control hub can also communicate with other brands model, for example, some Chinese manufacturers have united the application platform where it can control several brands, which gives big advantage and a large product line that can be controlled from the same platforms.

Some US brands work together by creating a partnership, where each brand hub is able to control many other smart devices by uniting the same communication technology of the devices and by including the same algorithm in their codes and firmware, so any hub control or brand will list his partner brands.  

 

As it has already been said that this technology is developing each day, and each brand is focusing on a specific solution of that technology, that is why the partnership has been created because is it’s hard for one company to cover all solution scenarios and needs.
5 to 6 years ago this was a luxury and expensive technology so it was rarely adopted, you can say that wealthy people were able to acquire such tech, and it was hard to install and maintain. Installation was very complex and needed a specialist and days of work, even the maintenance needed professionals. Though now the cost has been down by at least 300% if not more, usually a house used to cost not less than 15k to be automated, now 1k average can do the job.

Also, the installation is very easy anyone with the will to do it will be able to do installation, no need to any professional, as each device can take 1 minute to be installed and configured, though still some people still request specialist, even with this it will not cost that much that because any technician with a good IT knowledge can do the job with way less manpower cost that old tech specialists.

Some people might still ask what’s in it for me, how can I benefit from this automation at my house or my life or why should I spend my money on such luxury.
Well, I won’t call it luxury, because this tech has its audience and its solution benefits.
By the time people are getting busy in making money, many house members spend most of their days outside the house working till 5 pm at least, such tech is made to help these people in several aspects, such as saving time, organizing their life and saving power energy.

Let’s take a daily routine as an example:
You wake up each day a 7 am, the water heater has been automatically turned on at 4 am and when the water reached the needed temperature the water heater goes off at 5:30 am, you waked up and took a hot shower, at the meantime the Living room Ac and tv automatically turned on and set to the News channel, in the kitchen the coffee maker automatically goes on and made your coffee ready.
You didn’t waste any second, you had your coffee and your breakfast and watched the news, at 7:30 you left the house, the out of house scene has been activated and turned off all air conditions, televisions, lights and locked the security system.

You got to work and at 12 pm, your online order has reached your door and the delivery guy arrived at your front door house and knocked the bell, you instantly got a notification that there is someone on your front door, you simply opened your front door camera and communicate with the delivery and gave him access to your delivery box and opened it remotely so that he can place your order in it to be safe and you locked it after he left.

Your housekeeper get to your door at 2 pm and rang the bell, you get a notification and saw here on the camera and opened the front door to here so that she can get it and do here job while you are able to monitor here from the installed cameras and sensors, after one hour she left and the door has been locked.

At 3 pm the water heater goes on for 1 hour so that the water gets hot enough for after-work shower.

smart room thermostat zigbee

 

 

smart room thermostat zigbee

You finished work at 5 pm and head home, the trip will take you 30 mins, and at 5 pm your bedroom and, living room Air conditioner goes on to set and keep the house at a cool room temperature monitored by the sensor interaction.
You reached your house and got into a cool house environment, you got a hot shower and got to the living room.

Now it is bedtime, and your bedroom AC is already on to a healthy night temperature and the air purifier has been on for like 50 mins so that you can have a quiet and refreshing sleep.
The security system has been locked and all unnecessary appliance is OFF.

In conclusion, home automation technology has a lot of benefits, because it will save you time and money by reducing a lot of routine tasks, organizing and monitoring your house power consumption. Also, you are not obliged to apply to everything, you might automate only what you think is best for you and if you decided to automate more device it will be easy.
This the future technology, later in the future this technology will be combined with the AI technology where the AI will take a decision depending on the routine and repeated actions so the AI will manage our house life n the best way possible.
So my advice to anyone is to adopt such technology and one day you will know that it was the right decision.  

Posted on

How to install and configure broadlink tc2 smart light switch RF

How to install and configure broadlink tc2 smart light switch RF

How to install and configure broadlink tc2 smart light switch RF

Time needed: 13 minutes.

The Broadlink TC2 is a smart light switch as I assume that who will be reading this instruction article should know what and how this device mainly works so I will get straight to the subject, to install the TC2 and to control it I need the following requirements:
1- Broadlink TC2 
2- Broadlink RM Pro 
3- WiFi Router 
4- SmartPhone 
5- Internet service (for remote control) 
Broadlink Rm Pro plus RF 433Mhz Infrared bridgebroadlink light switch tc2

-As for the tools you will be needing an electricity tester screwdriver. 
-The application IHC will be used in this instruction article. 

ATT: If you do not have the basic technical knowledge and experience about home electricity, please it is better and safer to hire a professional.

  1. Install TC2

    I have good technical electricity knowledge so, I unscrewed and removed the old light switch from my wall and replaced it with the TC2.
    The cabling and installation are the same as any traditional light switch.
    On the back where the cables go in the TC2, the slot represented with L is for live current cable and the L1/2/3 slots are for the light cable.

  2. Install Intelligent home center application

    First of all, I need to install the control application, so I will open google play store (or Apple store) on my mobile and I will search for the application Intelligent home control and install it.

  3. Create A new account

    Now I will open the Intelligent home center application, of course, if this is the first time I am using this application I have to create a new account
    And this can be done by either using an email address and verify the account by email, or by login via Facebook by pressing on the sign with Facebook, as easy as that

  4. Rm Pro installation

    I will Plug the Rm pro to power by using the USB cable and power adapter and will make sure my phone is connected to the local WiFi network

  5. Configure

    When the RM Pro power-up, I will see a blue fast blinking light on the front of the device, if the blinking speed was 3 blinks per sec this means that the device is ready to configure.
    if It wasn’t as described I will have to reset the device by pressing and holding the reset button for 12 sec +/- 2sec

  6. Application

    Now while the RM pro is blinking 3 blinks per sec I will open the Application IHC home page, and to add a new device I will press on the + sign on and chose add device.

  7. Category

    in the category page choose the 1st one (universal remotes) and next on the device list also press the fist, which is RM pro

  8. WiFi

    Press next in the instruction and info page.
    Now in the second page, WiFi network page, my WiFi network name should appear in the area marked in red below in the first row, and I will write the WiFi password in the row below it when done, I will press Next.

  9. Adding device

    It will take about 10 to 20 second till the application setup the device, when successful, a page with the name of the device listed will show up,
    If failed you will have to reset and redo all steps carefully.

  10. Add TC2 light switch

    Now since the RM pro is up and connected I can add the light switch to my application (using the RF 433.mhz on The Rm Pro).
    Again from the application home page I will press on the + icon and Add device

  11. Category

    In the category page, I will pick switch category, and I will make sure to chose the 5th device named TC2

    Note: the other device with the same model name listed works fine but they will disable to the fast menu in the home screen

  12. Gang and info

    Now I have to chose how many Gang my light switch has, and next, I will give the TC2 and each gang on it a name, also I will choose the room and press next.

  13. Configure TC2

    When I get to this page, what I have to do is to press the tc2 actual button for about 6 to 12 sec until the tc2 starts blinking, in the meantime, while it is blinking I will press on the configure button on my application, and instantly the rm pro will send an RF code and the tc2 will stop blinking.

  14. Successful

    If the tc2 stopped blinking after you press configure press yes, if not, press no and repeat.

  15. Use

    You can switch the light ON and OFF from the fast menu on the room page or from the tc2 page

  16. Timer

    from the time page, I can set multiple and several different timers

  17. Settings

    in the page setting, I can edit the device information such as gang and device name and room.

  18. Done

    That is everything I had to say about the TC2 please if you would like to buy the TC2 use the following URL
    http://bit.ly/2UdltXm
    Smart home automation
    https://www.doobara.com

Posted on

Broadlink Sc1 smart switch how to install, configure and use by steps

Broadlink Sc1 smart switch how to install, configure and use by steps

Broadlink Sc1 smart switch how to install, configure and use by steps

Time needed: 10 minutes.

Broadlink Sc1 smart switch how to install, configure and use by steps

  1. e-control

    First of all, if you do not have the e-control application you have to download it from any of apple store or google play Apple store: press here Google play store: press here القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  2. Connect the cable

    to switch the SC1 on you have to connect the cables fist by referring to the manual instruction map: input: red cable: line wire blue cable: neutral wire output: brown: line wire black: neutral wire

  3. light indicator

    After powering the SC1 make sure the light indicator on the power button is blinking fast blue light 2~3 blinks per second

  4. Connect to local WiFi

    Make sure the smartphone which you are using is connected to the same local network that you want to install the SC1 to

  5. Application Main screen 

    الالقاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  6. add device

    To add a new device press on the + icon on the top right side of the application main page screen and chose the 3d choice which is Add device القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  7. WiFi network password 

    This page is about the WiFi network credential in the first top box, your local WiFi network SSID should already insert as you currently connected network. In the second box insert your WiFi network password ATT: make sure your password is right by pressing the eye Icon to show the password letters فالقاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  8. configure

    As soon as you finish inserting the right information you can press on configure. After pressing configure it will take about 30 sec so that the sc1 get the information from the application and connect to the WiFI router القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  9. Successfully connected 

    If everything goes right and the device is connected successfully, you will see the following page with the title Configuration success القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  10. Main screen new icon

    Now on the main page, you can see the new Icon which has the default name (WIFI and some Chinese letters no clue what they mean) press on the Icon to get the SC1 control page القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  11. SC1 control page 

    On the middle of the control page a big button which switches the device ON/OFF also, this button is an indicator of the device state القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  12. Timers

    To set a timer press on the clock Icon on the right top side of the SC1 page القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  13. Set a timer

    When you get to the timers page, press on the + icon in the bottom of the timer page, which will show 3 choices of timers القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  14. Countdown 

    The first type of timer is the countdown timer, the maximum counting length you can set is 23h:59min and 59 sec القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  15. Scheduled timer 

    The second type of timer is the scheduled timer, where you can create to action that will happen repeatedly any day and time of the week القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  16. Cycled timer

    the last timer is the cycled timer which keeps repeating the same action for a specific duration in a specific time frame of the chosen weeks days القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  17. Enable or disable timer

    You can enable or disable any timer by using the to toggle next to it القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  18. Setting

    To get to the SC1 setting page press on the wheel on the top right side of the sc1 page القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  19. Edit info

    The first thing you can edit in the setting page is the device name and icon picture, do not forget to press save when you finish القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  20. lock device 

    the local device toggle is to prevent the current device from getting shared with you network member. القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  21. push message 

    This action is not working or it is an update for the next model, but at the moment it is just a toggle that does nothing lol. yeah I know this is stupid

  22. Display status

    The display status does what is says, it will enable the state light indicator that appears next to the icon in the main screen

  23. Firmware update 

    The firmware update is to update the SC1 on board firmware, so it is recommended and wise to check for any new update every now and then القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  24. Random timer

    The random time will just switch the SC1 On/OFF at random times, the purpose of that is let say in case you have a light plugged to the SC1, the light will go On/OFF randomly for the sake of security, it will make anyone attempting to steal your place think that there is someone in there so he will go away hopefully. القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول

  25. Charging protection

    Charging protection, protect any connected charger from power current instability القاطع الذكي برودلينك كيفية التثبيت والاستعمال باستخدام تطبيق اي كنترول Broadlink Sc1 smart switch how to install, configure and use by steps

Broadlink Sc1 smart switch how to install, configure and use by steps

The e-control application also has a builtin IFTTT tool, that let create a trigger using any of broadlink sensor such the A1 (environment sensor) and the S2 (security Kit)

I hope this How to article was helpful

please follow us on any of our social media platforms to stay up to date press here for Facebook page press here for Instagram page press here for youtube To buy the Broadlink SC1 press here

Also, you can contact us by: Phone/ Whatsapp: 70-856471 email: [email protected] Website: https://www.doobara.com