How to add new BroadLink smart device to E-control app
How to add new BroadLink smart device to E-control app ?
How to add new BroadLink smart device to E-control app ?
Did you just get or you Are planning to add a new Broadlink smart device? Certainly, this article will assist you with the steps also a video will be available below. The following steps will work on all Broaldink smart devices models. finally feel free to email us for any question. note: The light indicator is locating in a different place on each model through the light patterns are the same. Requirement:
Wi-Fi router (network)
Smartphone
Application E-control
Internet connection (for some devices)
How to add new BroadLink smart device to E-control app ?
How to add new BroadLink smart device to E-control app ?
Download E-control first of all Download the e-control application by searching for it on Google play store and Apple store, or by clicking on the links below:
For Android: Press here For IOS: Press here
Connect to WiFi Make sure the smartphone is connected to the local WiFi router which we want to add the broadlink smart device to.
Plug the Broadlink smart device to power.
Stat indicator Make sure that the broadlink smart device light indicator is blinking fast (2~3 blink per second).
Open e-control Open e-Control application on your smartphone.
add device From the main screen of the e-control app press on the + (plus) Icon, located on the top right corner of the screen.
From the drop-list choose the 3d choice which is (Add device).
WiFi password In this screen, you should be able to see your local WiFi network name (SSID) which your smartphone is currently connected to, “instead of wifi network in the image you will be seeing your WiFi network name”.
Type the currently connected to WiFi password correctly in the box below your WiFi network name.
NB: Also you can check your password by pressing the eye icon located at the end of the password box, and which will reveal the password letters for checking.
Configure Finally After making sure that the password is correct, press on Configure buttons at the bottom of your application current page.
Connecting Now, wait for like 30 second so that the Broadlink smart device is configured and connected automatically.
Finally, After reaching 100% your Broadlink smart device will show up as an icon that leads to the device control page.
How to add new BroadLink smart device to E-control app ? If failed In case you didn’t get to the device screen this means something went wrong, check your WiFi password carefully, make sure your phone is connected to the WiFi network, and reboot your WiFi router. Also, make sure to reset the Broadlink smart device and retry the whole previews steps. Cheers
